Sliding wardrobe doors are fitted with rollers that allow the door to glide open and closed. The rollers are attached to a rail, which allows the roller to slide along it. These rails can become damaged over time, but they can be repaired using a few simple tools. The rails are attached to the walls of the wardrobe using brackets. The brackets will have been fitted prior to the installation of the rails, so take a tape measure and check that the position of the bracket is correct before you start work on repairing or replacing it.
Sliding doors are the perfect addition to any home. You can use them to separate the room or divide space. Depending on the style of your home, they can also add a unique and modern look to your space. Measure sliding wardrobe doors before you start the project! This will be very time consuming for you, but it is well worth it. Spending more time measuring will definitely save you time in the long run.
Sliding wardrobe doors are the best option for a dressing room, as they’re easy to install and replace. You can choose between left- and right-handed doors, depending on the direction in which you want them to slide. If you’re wondering how to measure sliding wardrobe doors, here’s what you need to know.
Rubbing gently with your fingers alone will leave marks on your door. To avoid these marks, use a piece of fine sandpaper to remove any varnish or paint from the surface of the door. Then clean the door thoroughly with a damp cloth before measuring it.
Measure the opening into which you want to fit your new wardrobe door. This includes the width and height of this area, as well as its depth (from wall to wall), if necessary. It also includes any fixtures that are already present – for example, if there is a light fixture above the area.
Measure the thickness of your sliding door panels; these should be at least 7/8″ for 1/2″ sliding doors and 1 3/4″ for 1″ sliding doors. When adding this measurement together with those for the height and width, you will determine whether there is enough space available inside the dressing room for your new door panels.
Sliding wardrobe doors are a handy and decorative feature for your bedroom, but measuring them correctly is one of the most important things to do before beginning to install them. As with any other door project, you will need to measure the opening of your room and ensure that the doors will fit through it.
Tape measure in hand, you’ll then want to make sure that the measurements are correct by taking note of several key factors. The first is the width of the door. This measurement will be taken from the outside edges of both sides in order to ensure that there is enough space for the door to slide back and forth without hitting anything.
Next, you’ll want to look at the height of the door itself. It is best if this measurement is taken from just below the top frame and then up to where it meets with the ceiling or top track. This way, you won’t have any issues with hitting your head on it when you walk through it or trying to close it while standing on a chair. To know more information about it click here.
